【Scope
of Application】
Shengli
SL-480B full-frequency pipeline detector is the preferred equipment specially detecting various kinds of pipelines for oil (gas)
transportation, water supply, drainage, gas, heat, and industry, etc. and
various cables for electricity and telecommunication, etc. used by such
underground pipeline design organizations as professional pipeline detection,
pipeline management and maintenance, municipal administration planning and
construction, power supply, building and construction. It’s also the optimum
replacement for traditional underground pipeline detectors.
【Characteristics】
1.
Adoption of DSP processors, having a higher calculation speed and accuracy;
2.
The orientation function available to indicate the pipeline running, making
location faster;
3.
The 10W broadband transmitter used, applicable to various environments;
4.
The Lithium battery pack used to supply power for both the receiver and the
transmitter, being energy-efficient and environmental-friendly, able to save battery
costs of RMB 3000 to 5000 yuan annually.
【W(wǎng)orking
Principles】
The
full-frequency detector detects underground pipelines electromagnetically,
which applies signals to metal pipelines through the transmitter, generates the
piping currents in metal pipelines and the secondary magnetic field around
pipelines, and measures the secondary magnetic field of pipelines on the ground
through the receiver, in order to accurately determine the location, buried
depth, running direction, route and signal current intensity of pipelines.
【Technical
Parameters】
Transmitter:
Function:
to apply the location signal of a certain frequency onto pipelines
Output
modes: induction, direct link, clamping
Working
frequencies: 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz
Frequency
configuration at various modes:
Induction
mode：65KHz, 83KHz
Direct
link mode：128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz, 83KHz
Clamping
mode：33KHz
Maximum
power output：10W
Maximum
voltage output：60V
Maximum
current output：1A
Power
supply: dual power supply, Lithium battery pack (energy-efficient and
environmental-friendly)
Continuous
working time:
1W 12 hours
5W 8 hours
10W 5 hours
Weight：2.6Kg
Ambient
temperature：-20℃-50℃
Quality
standard：ISO9001：2008
Receiver:
Purpose:
location of underground pipelines and cables (able to measure the position,
running direction, depth, and current of underground pipelines)
Location
modes:
Peak
mode: two horizontal coils used
Broad
peak mode: one horizontal coil used
Valley
mode: one vertical coil, having the function of left and right orientation
Receive
frequencies: 50Hz, 100Hz, radio, 128Hz, 512Hz, 1KHz, 2KHz, 8KHz, 33KHz, 65KHz,
and 83KHz
Gain
control: automatic gain, range of 0-100dB
Location
accuracy: 5% of depth (range of depth: 0-3m)
10% of depth (range of depth:
>3m)
Measurement
accuracy of currents: ≤5% of actual current
Range
of measurement: 0-6m
Power
supply: Lithium battery pack (energy-efficient and environmental-friendly)
Working
time: an average of 8 hours
Weight:
1.8kg
Ambient
temperature: -20℃-50℃
Quality
standard: ISO9001：2008
【Standard
Configuration】
10W broadband
large-power transmitter, full-frequency receiver, clamp, direct link line,
earthing bar, transmitter charger, receiver charger, packing box, and user’s
manual
